| Technical Data |
| Operating voltage | 110 V/AC or 230 V/AC (is led to the dimmer module via the connections)
| | Output | The module delivers a control voltage for the potentiometer input of the dimmer modules M12 or M28
| | Input | The module M150 may either be controlled with control DC voltages of 1 - 5 V/DC or 3 - 12 V/DC or 6 - 24 V/DC. Or with TTL pulses with a pulse width modulation. Frequency between 1 - 10 kHz, impulse voltage approx. 5 V/DC, pulse width 10 - 90 % PWM. The power is adjusted with the pulse width 10 - 90 %.
| | Input resistances | control input 1 - 5 V/DC > 1,4 k, control input 3 - 12 V/DC > 4.1 k, control input 6 - 24 V/DC > 9,1 k
| | TTL pulse input | > 1,1 k
| | Galvanic separation | via an optocoupler between the control inputs and the signal output towards the dimmer module
| | Dimensions | ca. 70 x 60 x 23 mm |
By connecting this module in series, it is possible to control our dimmer modules (230 V/AC or 110 V/AC) M012 + M028 (from microcomputers or PCs) with a DC voltage or a pulse width modulation. This module is connected at the spot of the potentiometer. Galvanic separation of the control circuit via optocouplers. Control may be done optionally (at 230 V/AC) 1 - 5 V/DC, 3 - 12 V/DC, 6 - 24 V/DC. Or TTL rectangular pulses 5 V/DC, 1 - 10 kHz pulse width 10 - 90 % PWM (Puls width modulation). Regulation is done by changing the pulse width.
The DC and pulse converter module M150 is an ideal controlling module for:
|
