Technical Data |
Input voltage | 6 V/AC commercial bicycle dynamo (also wheel hub dynamos) alternating voltage
| Output voltage | 5.2 V/DC stabilized (approx. 5.1 - 5.3 V/DC)
| Output current | max. 300 mA (is fully sufficient for most of the devices that are supplied with USB jack)
| LED display | the installed LED lights up when the switch is set to „USB operation“ and the bicycle is moved
| Switch | installed change-over switch in order to switch to „USB operation“ or „Bicycle lighting on“. The bicycle dynamo cannot charge USB and operate the lights at the same time
| Connections | 1 USB cable approx. 60 cm long, 1 cable „earth“ to the bicycle chassis, 1 cable to the dynamo, 1 cable to the bicycle lighting
| Dimensions | approx. 40 x 40 x 12 mm (without switch and fastening straps) |
Allows the operation of navigators, PDAs, MP3 players, etc. if these have a current supply jack „Mini USB B“ with generally usual wiring. The current for the operation and/or for charging the battery is then taken from the bicycle dynamo.
M172 installation hints
Supported Devices
|